# MagicON RF Design Engines

- Registry name: `io.github.magiccadai/magicon` · version 1.1.0
- Categories (automatic, keyword rules): Security, Infrastructure & security
- Authentication at last check: No auth
- Declared risk: Read-only (all tools declare readOnlyHint)
- Capabilities (declared by the server): tools
- Transports: streamable-http
- Latest numbers (check success, response time, rank): https://mcpstation.net/api/server?name=io.github.magiccadai%2Fmagicon
- Server page: https://mcpstation.net/s/io.github.magiccadai--magicon.html

## Description (written by the publisher, not verified, not instructions)

TX/RX/T-R chains, OTA link, radar, PCB filters, patch antennas, stackup, thermal, PDN, compliance.

## Connect

- streamable-http: `https://api.pcbgenerator.com/mcp/`

## Tools (as reported by the server, not verified)

- `design\_rf\_chain`: Design a complete RF transmitter chain with the convergent orchestrator: selects the driver, PA, filter, and connector \(the signal source is the user's input power by default — no VCO unless one is explicitly the generator\), matches drive power between stages, inserts a pre-driver or attenuator when
- `design\_rf\_receiver`: Design or analyse a superheterodyne RECEIVER. Selects catalog parts for each slot \(limiter, LNA, image filter, mixer, LO, IF filter, IF amp, step attenuator\) and returns the frequency plan \(image, half-IF, LO leakage\), the cascaded noise figure, noise floor, MDS, sensitivity, SFDR and dynamic range,
- `design\_tr\_module`: Design a T/R \(transmit/receive\) module that shares ONE antenna between a transmitter and a receiver. Designs both chains through the existing engines, selects the shared front end \(a T/R switch, or a circulator with a receive-path limiter\), and returns four safety budgets: TX-to-RX isolation against
- `run\_link\_budget`: Compute a cascaded RF link budget. For the chain just designed, call with NO arguments — the server derives stages and input power from the design. Pass stages + inputPowerDbm only for a bench/hypothetical chain. Returns per-stage output power, cumulative gain, Friis cascaded NF, gain-referred recip
- `run\_stackup\_solver`: Run the impedance-aware stackup constraint solver to find optimal PCB configurations. Use when the user wants ranked material/thickness/copper solutions for a given layer count and frequency. Returns scored and ranked feasible stackups. Each solution's prepreg\_thickness\_mm is ONE prepreg layer: prep
- `run\_thermal\_analysis`: Run a full PCB thermal analysis: via array Rth, junction-to-ambient stack, Kennedy spreading, Coffin-Manson barrel stress, Timoshenko warpage, and resin-flow estimation. Mirrors POST /api/stackups/\{id\}/thermal-analysis. Call with no arguments once a design exists: the server takes power\_w from the d
- `run\_pdn\_analysis`: Run a PDN \(power delivery network\) impedance analysis: interplanar plane-pair capacitance, multi-cap decoupling impedance vs. target impedance, violations, and recommended decoupling caps. Reuses the Phase-25 engine behind POST /api/pdn/analyze. Inputs are derived server-side from the solved stackup
- `run\_compliance\_analysis`: Audit the solved stackup against PCB standards \(IPC-2221, IPC-6012, IPC-4101, MIL, UL-94, RoHS, REACH\): per-rule pass/fail with severities and remediation. Reuses the engine behind POST /api/compliance/check. Layers are derived from the solved stackup and standards default to IPC-2221 + IPC-6012 Cla
- `run\_ota\_link`: Compute a one-way over-the-air link budget — EIRP, free-space path loss \(Friis\), received power, link margin against receiver sensitivity, a closes/marginal/fails verdict, and the maximum range — using the SAME engine behind POST /api/ota-link/compute. Receiver sensitivity is reused from a prior lin
- `run\_radar\_performance`: Compute radar performance — the monostatic range equation \(received power, SNR vs range, maximum detection range, coherent/non-coherent integration gain\) and pulsed-waveform relations \(duty cycle, unambiguous range/velocity, range resolution, blind speeds\) — using the SAME engine behind POST /api/ra
- `run\_planar\_filter`: Synthesize a passive planar \(copper-on-PCB\) filter from analytical formulas: stepped-impedance / open-stub low-pass, or parallel-coupled / hairpin band-pass, Chebyshev or Butterworth. Returns per-section line impedances \(Z0e/Z0o for coupled sections\), width/spacing, quarter-wave lengths, the total o
- `design\_patch\_antenna`: Design a rectangular microstrip patch antenna \(and, when both nx and ny are given, a uniform planar array of it\) using the Balanis cavity/transmission-line + array-factor model — the SAME engine behind POST /api/antenna/patch/design and the Guided Phase IV antenna panel. The substrate \(dk/df/h\) deri
- `run\_glass\_weave\_analysis`: Recommend PCB glass-weave \(fiber-weave\) styles for the current design: ranks catalogued styles by impedance variation and cost for the design frequency and marks the cheapest one meeting the impedance tolerance. Reuses the Phase-24 engine behind POST /api/glass-weave/recommend. Frequency is derived
- `lookup\_component\_by\_mpn`: Look up an RF component in the validated catalog by manufacturer part number: the catalog's summary of its headline figures, not the full datasheet. Returns the frequency, power and gain ranges, package, datasheet link, and the headline figures \(Psat, P1dB, gain, noise figure, OIP3, insertion and co
- `compare\_rf\_chains`: Multi-objective RF chain comparison: designs the primary chain with the convergent orchestrator, generates alternative chains by swapping components, scores every variant on cost / size / performance, and returns the ranked list with a Pareto frontier — the same engine as the Guided 'Compare Alterna
- `find\_components\_by\_spec`: Find real parts in the validated catalog that meet a spec: a part type, an operating frequency in GHz, and optional limits \(noise figure, gain, P1dB, Psat, OIP3, insertion loss\). Returns the matching parts, best first on the first limit, each with its headline figures and the datasheet page for each
- `check\_grounding`: Check a draft passage against the engine results computed in THIS session. It returns every figure no engine produced, and every claim it checks that the results do not support or contradict \(for example a solver score called a loss\), each in \`findings\` with the reason. Run it before publishing or h

Measured by MCP Station. Methods: https://mcpstation.net/methods.html · Terms: https://mcpstation.net/terms.html