All servers · Shops & products

TuneWorks

io.github.chrismore/tuneworks · v0.1.0

Measured by MCP Station

Description written by the publisher, not verified

Motorsports workspace for vehicles, setups, sessions, logs, maintenance, and race engineering.

Connect

claude mcp add --transport http tuneworks https://tuneworks.ai/mcp

{
  "mcpServers": {
    "tuneworks": {
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

Tools as reported by the server

• calculate_race_fuel_and_weight
  Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or save account data. Assumes the entered per-lap consumption applies to race, formation, and allowance laps. Finish weight retains only the sel
• calculate_gear_ratio_speed
  Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save account data. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world numbers.
• calculate_tire_pressure_adjustment
  Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save account data. This gives a next-test pressure, not a universal ideal. Recheck after the next run.
• calculate_corner_balance
  Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read or save account data. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.
• calculate_spring_wheel_rate
  Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save account data. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.
• calculate_fuel_injector_size
  Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or save account data. This is a sizing estimate. Confirm with your tuner and fuel pressure data.
• convert_afr_lambda
  Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Calculates from measured inputs without authentication and does not read or save account data. Use this as a conversion reference. Tune targets depend on fuel, engine, load, and calibration strategy.
• calculate_brake_bias
  Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save account data. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.
• compare_tire_sizes
  Compare tire diameter, circumference, ride height, and speedometer change. Calculates from measured inputs without authentication and does not read or save account data. Actual mounted diameter changes by tire model and pressure. Use manufacturer specs when available.
• check_race_alignment
  Check camber and total toe against broad autocross and track baseline ranges. Calculates from measured inputs without authentication and does not read or save account data. This is a baseline checker, not a vehicle-specific prescription. Tire wear and driver feedback decide the next step.
• calculate_lap_time_delta
  Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.
• calculate_ethanol_blend
  Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all volumes use the selected unit. Source ethanol contents are measured values. Fresh mode requires finalVolume; existing mode requires finalVolu
• diagnose_handling_issue
  Provides understeer/oversteer setup guidance without authentication or access to TuneWorks account data.
• analyze_tire_temperatures
  Interprets inside, middle, and outside tire temperature readings without authentication or access to TuneWorks account data.
• recommend_autocross_damper_adjustment
  Provides a bounded shock/damper adjustment recommendation without authentication or access to TuneWorks account data.
• find_autocross_sites
  Search the public TuneWorks Autocross Site Finder by coordinates and minimum paved-area dimensions. This may take several minutes because it queries live map and imagery providers.
• get_tuneworks_app_capabilities
  Describes TuneWorks free public capabilities and connected garage capabilities for vehicles, setups, sessions, maintenance, shop lists, Share Build, and log history.
• create_vehicle
  Adds a vehicle to the connected user’s TuneWorks garage. Deletes are not supported.
• update_vehicle write/delete
  Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.
• list_vehicle_modifications
  List structured modifications for an accessible TuneWorks vehicle.
• get_vehicle_modification
  Read one structured modification from an accessible TuneWorks vehicle.
• create_vehicle_modification
  Create a structured modification on an editable TuneWorks vehicle.
• update_vehicle_modification write/delete
  Update a structured modification on an editable TuneWorks vehicle.
• archive_vehicle_modification write/delete
  Mark a modification canceled so it remains in vehicle history. Requires explicit confirmation.
• delete_vehicle_modification write/delete
  Permanently delete a vehicle modification and its files. Requires explicit confirmation.
• get_garage_summary
  Returns an overview of the connected user’s TuneWorks garage, including recent activity, saved vehicles, setups, sessions, maintenance, and lists.
• list_vehicles
  Lists vehicles saved in the connected user’s TuneWorks app garage.
• get_vehicle_context
  Returns one saved TuneWorks vehicle with its setup, session, maintenance, list, and log context.
• list_logs
  List bounded metadata for logs attached to one connected TuneWorks vehicle. Raw log samples are not returned.
• get_log_context
  Read bounded metadata, channel schema summary, and saved focus window for one accessible TuneWorks log. Raw log samples are not returned.
• list_ai_log_tuner_transcripts
  List recent AI Log Tuner conversations owned by the connected TuneWorks user. Returns conversation metadata without message contents.
• get_ai_log_tuner_transcript
  Read the ordered messages and saved analysis summaries for one AI Log Tuner conversation owned by the connected TuneWorks user.
• list_ai_race_engineer_transcripts
  List recent AI Race Engineer conversations owned by the connected TuneWorks user. May be filtered to one vehicle.
• get_ai_race_engineer_transcript
  Read one AI Race Engineer conversation and its ordered messages. Internal execution debug traces are not returned.
• archive_vehicle write/delete
  Archive a connected user vehicle using TuneWorks soft-delete behavior. Requires explicit user confirmation and never hard-deletes data.
• list_setups
  Lists chassis setups and setup history saved in the connected TuneWorks account.
• create_setup
  Saves a new TuneWorks setup for a vehicle. Deletes are not supported.
• update_setup write/delete
  Edits an existing TuneWorks setup revision. Deletes are not supported.
• archive_setup write/delete
  Archive all active revisions of a connected user setup. Requires explicit user confirmation and never hard-deletes data.
• list_sessions
  Lists driving sessions, events, track days, autocross runs, and session notes saved in TuneWorks.
• create_session
  Saves a new TuneWorks driving session. Deletes are not supported.
• update_session write/delete
  Edits an existing TuneWorks driving session. Deletes are not supported.
• copy_session
  Create an additive copy of an accessible TuneWorks driving session.
• archive_session write/delete
  Archive a connected user driving session. Requires explicit user confirmation and never hard-deletes data.
• list_maintenance
  Lists service reminders, maintenance history, due work, and completed maintenance saved in TuneWorks.
• create_maintenance
  Creates a TuneWorks maintenance reminder or service item. Deletes are not supported.
• update_maintenance write/delete
  Edits a TuneWorks maintenance reminder or service item. Deletes are not supported.
• archive_maintenance write/delete
  Archive a connected user maintenance item. Requires explicit user confirmation and never hard-deletes data.
• list_shop_lists
  Lists reusable shop lists, event prep lists, task lists, and parts lists saved in TuneWorks.
• get_shop_list
  Read one connected user shop list with its categories and items.
• list_shop_list_items
  Lists individual items and completion status in one connected user shop list, with optional filtering for open or completed items.
• create_shop_list
  Creates a TuneWorks shop list, task list, or parts list, optionally including categories and items.
• update_shop_list write/delete
  Edits shop-list metadata or replaces the full categories and items collection.
• add_shop_list_category
  Atomically add one category to an existing editable shop list without replacing its existing categories or items.
• add_shop_list_item
  Atomically add one item to an existing editable shop list without replacing existing items. If its category does not exist yet, TuneWorks creates it.
• copy_shop_list
  Create an editable copy of a connected user shop list with all item checks reset.
• reset_shop_list_items write/delete
  Reset every item in a connected user shop list to unchecked/open.
• update_shop_list_item write/delete
  Atomically check or uncheck one shop-list item, change its quantity, or do both.
• archive_shop_list write/delete
  Archive a connected user shop list so it no longer appears in active lists. Requires explicit user confirmation.
• delete_shop_list write/delete
  Delete a connected user shop list from active use by safely archiving it. Requires explicit user confirmation and does not hard-delete history.
• get_share_build_options
  Lists existing TuneWorks vehicles, setups, and sessions available for Share Build.
• preview_share_build
  Summarizes selected Share Build vehicle, setups, sessions, recipients, and message without sending email.
• get_user_settings
  Read the connected user’s preferences, unit choices, and custom vehicle makes.
• update_user_preferences write/delete
  Update selected preferences for the connected TuneWorks user.
• update_unit_settings write/delete
  Update unit-category choices for the connected TuneWorks user.
• create_vehicle_make
  Add a custom vehicle make to connected user settings.
• update_vehicle_make write/delete
  Rename or rescope a custom vehicle make.
• delete_vehicle_make write/delete
  Permanently delete a custom vehicle make after explicit confirmation.
• list_chart_channel_sets
  List saved chart-channel sets.
• create_chart_channel_set
  Save a named set of chart channels.
• mark_chart_channel_set_used
  Update the last-used time for a saved chart-channel set.
• delete_chart_channel_set write/delete
  Permanently delete a saved chart-channel set after explicit confirmation.
• list_favorite_charts
  List favorite charts for an accessible vehicle.
• create_favorite_chart
  Save a favorite chart for an accessible vehicle and source log.
• delete_favorite_chart write/delete
  Permanently delete a favorite chart after explicit confirmation.
• get_vehicle_map_config
  Read the saved map-channel configuration for an accessible vehicle.
• save_vehicle_map_config write/delete
  Create or replace the connected user’s complete map-channel configuration.
• complete_maintenance
  Record completed maintenance in vehicle history and advance its tracker.
• list_ecu_files
  List ECU-file metadata. Binary contents are never returned.
• inspect_ecu_file
  Inspect one authorized ECU file and optionally a decoded table. Binary contents are never returned.
• process_ecu_file
  Start or retry processing for an existing ECU definition file. This does not upload, create, or read a file, and processing may consume compute and analysis resources.
• retry_ecu_file
  Retry an eligible failed, already stored ECU file. MCP does not upload binaries.
• delete_ecu_file write/delete
  Permanently delete an authorized ECU file after explicit confirmation.
• send_share_build
  Emails selected TuneWorks vehicle, setup, and session details to up to three recipients. Explicit user confirmation is required.
• list_teams
  List teams available to the connected user, or read one team’s settings.
• create_team
  Create a new team for the connected user.
• rename_team write/delete
  Replace a team’s name.
• update_team_member_role write/delete
  Replace a team member’s role.
• remove_team_member write/delete
  Remove a member from a team after explicit confirmation.
• revoke_team_invite write/delete
  Revoke a pending team invitation after explicit confirmation.
• leave_team write/delete
  Remove the connected user from a team after explicit confirmation.
• delete_team write/delete
  Delete a team after explicit confirmation.
• send_team_invite
  Create and email a team invitation only after explicit user confirmation.
• list_custom_tracks
  List custom tracks accessible to the connected user.
• get_custom_track
  Read one accessible custom track.
• create_custom_track
  Create a custom track for the connected user or an editable team.
• update_custom_track write/delete
  Replace the editable fields and ownership scope of a custom track.
• delete_custom_track write/delete
  Permanently delete a custom track after explicit confirmation.
• list_object_attachments
  List attachment metadata for an authorized object. Binary contents are unavailable through MCP.
• delete_object_attachment write/delete
  Delete an object attachment from blob storage after explicit confirmation.

Tool changes

• 2026-10-19: calculate_race_fuel_and_weight, calculate_gear_ratio_speed, calculate_tire_pressure_adjustment, calculate_corner_balance, calculate_spring_wheel_rate, calculate_fuel_injector_size, convert_afr_lambda, calculate_brake_bias, compare_tire_sizes, check_race_alignment, calculate_lap_time_delta, calculate_ethanol_blend
• 2026-10-18: calculate_race_fuel_and_weight, calculate_gear_ratio_speed, calculate_tire_pressure_adjustment, calculate_corner_balance, calculate_spring_wheel_rate, calculate_fuel_injector_size, convert_afr_lambda, calculate_brake_bias, compare_tire_sizes, check_race_alignment, calculate_lap_time_delta, calculate_ethanol_blend

Repository · JSON · Text for agents · Registry updated 2026-10-17